Main Responsibilities: 主要职责
- Coordinate with clients 与客户协调
- Coordinate with relative disciplines for input/output 协调输入/输出的相关条理
- Lead process calculation such as: stoichiometric calculations, hydraulic column calculations pump hydraulic, line size, water hammer, PSV release capacity and size for fire case and restriction orifice etc. with Aspen Plus (mandatory)
领导工艺计算，如：化学计量计算、液压柱计算液压泵、管路尺寸、水击、PSV释放能力和防火箱和限制孔尺寸等。会使用Aspen Plus
- Responsible for process deliverable documents quality control: P&ID, Equipment list, Pipeline list, Safety device list, tie-in list;
负责工艺：可交付文件质量控制：PID、设备清单、管道清单、安全设备清单、附件清单
- Lead technic support of process equipment/package/special item (PSV, breath valve, flame arrestor etc.) procurement: datasheet & technic Spec, MRQ, TBE, MRP, technical clarifications with client & vendors & subcontractors, vendor drawing review and approval;
- 领导工艺技术在设备/包装/特殊项目（PSV、呼吸阀、阻燃器等）。在采购：数据表、技术规范、MRQ、TBE、MRP、与客户进行的技术澄清；供应商、分包商、供应商图纸审查和批准；
- Responsible for authority approval meeting preparation, introduction and modification for Safety Device Volume, Occupational Disease Protection Volume; and General introduction volume and Cost Estimate.
负责编制安全装置卷、职业病防护卷、介绍和修改；一般介绍卷和成本估算。
- Problem solution support for construction site
对施工现场的问题解决方案的支持
- Concept design for project, including ±10% Cost Estimate:
-项目概念设计，包括±10%成本估算
- Lead process concept design: process description, P&ID, process equipment list, pipeline list, safety device list, tie-in list, process datasheet and utility consumption, start-up procedures etc.
- 领导工艺流程概念设计：工艺描述、PID、设备清单、管道清单、安全设备清单、连接列表、数据表和公用事业消耗量、启动程序等。
- Responsible for process quality and schedule control; 负责工艺质量和进度控制
- Technical clarifications with vendors & subcontractors, cost estimate support
- 与供应商进行的技术澄清，分包商，成本估算支持
- A revamping project, expansion or modification projects with ±10% Cost Estimation
对改造项目具有±10%成本估计、扩展或修改项目的能力
Requirements: 要求：
- Basic studies and professional experience recommended 基础研究和专业经验
- Very good ability to communicate and a distinct ability to work in a team
非常好的沟通能力和在团队中确切清楚的工作能力
- Independent working 独立工作能力
- Process design experience in Engineering company recommended
有工程公司的工艺设计经验
- Experience in piping design (piping layout with PDSOFT, piping material study etc.)
有管道设计经验（采用PDSOFT的管道布局、管道材料研究等）
- Project proposal, Feasibility Study Report (FSR)
项目提案、可行性研究报告(FSR)的能力
- Project Application Report (PAR) 项目申请报告(PAR)
- Front End Engineering Design (FEED) 前端工程设计(FEED
- Basic Engineering Package (BEP) 基础工程软件包(BEP)
- China Preliminary Design Package (CPDP) 中国初步设计软件包(CPDP)
- Detailed Engineering Design (DED), and site construction support etc.
详细的工程设计(DED)、现场施工支持等
- The process design experience mainly includes calculation for material and heat balance, equipment and pipes size;
工艺设计经验主要包括材料和热平衡、设备和管道尺寸的计算
- Development of PFD / PID / UID; 开发PFD/PID/UID
- Preparation of process specification, equipment list, pipeline list and datasheet, special piping fitting list;
编制工艺规范、设备清单、管道清单和数据表、专用管道配件清单；
- Pump hydraulic calculation, PSV & breathe valve calculation, flame arrestor and steam traps selection, stoichiometric calculations, hydraulic column calculations;
- 泵液压计算、PSV、呼吸阀计算、阻燃器和蒸汽陷阱器选择、化学计量计算、液压柱计算；
- Procurement support with material requisition/specification (MRQ) /TBA/MRP;
- 对采购支持： 在材料要求/规格(MRQ)/TBA/MRP的理解；
- Vendor drawing review and approval; cost support, etc.
对供应商图纸审核和批准、成本支持等
- Experience with HAZOP execution procedure
有HAZOP执行程序的经验
Required Knowledge and Skills
- Codes & Standards 规范标准
o Knowledge of standards & codes regarding to process and piping design such as GB, HG, SH, ASME, API, NEC, DIN and so on
了解有关工艺和管道设计的标准和规范，如GB、HG、SH、ASME、API、NEC、DIN等
- Computer 计算机
o ProⅡ, Hysys, Aspen Flare System Analyzer or Aspen plus, HTRI, SPPID, MS office 2010 (Word, Excel, PowerPoint, Project), AutoCAD, AutoCAD 3D Plant, PDSOFT, Aspen to calculate
- Languages 语言
English 英语良好

工作地址:上海静安区江宁路495号博鸿大厦508室 
 职位福利：周末双休、五险一金、加班补助、带薪年假、定期体检、员工旅游、节日福利